10.0.0.2

10.0.0.2 Is a local IP address commonly utilized by both home users and businesses. Many devices, including routers from brands like D-Link, Edimax, Siemens, and Micronet, as well as various smart speakers, Raspberry Pi, webcams, and printers, use this IP address as their default setting.

However, the admin is often designated as a subnet, making it an essential part of local network configurations.

How to login to 10.0.0.2?

To login 10.0.0.2, you should follow these steps.

  1. Open a web browser and type “10.0.0.2” into the address bar.
  2. Enter the Username as “admin” and Password as “admin,” then click on the Login button.
  3. This will grant you access to the Telkom D-Link Gateway.

How to Change Telkom D-Link WiFi Password and SSID?

To change the WiFi password and SSID (WiFi network name) on a Telkom D-Link router, you can follow these steps:

  1. Log in to the Telkom D-Link router gateway.
  2. Open a web browser and type 10.0.0.2.
  3. Once logged in, follow these steps:
    • Select “Basic Setup” from the menu.
      • Then, choose “Wireless.”
      • Under “Wireless,” select “Security Setting.”
      • In the “Security Setting” section, you’ll find the “WPA Preshare key” field. Enter your new WiFi password (security key) in this field.
  4. Click “Apply” to save the changes.
  5. Next, to change the SSID (WiFi network name):
    • Go to “Basic Configuration 2.4GHz.”
      • Locate the “SSID” field and enter the new WiFi network name you want.
  6. Click “Apply” to save the changes.
  7. If you have a 5GHz band and want to change the WiFi network name for that band, click on “Basic Configuration 5GHz” and repeat the process, entering the desired SSID for the 5GHz band.

After completing these steps, your Telkom D-Link router will have a new WiFi password and SSID. Make sure to reconnect your devices to the updated WiFi network using the new credentials.

Where Is The Login Page For 10.0.0.2

The login page can be found by simply entering http://10.0.0.2 into your web browser. This will direct you to the login page for your admin panel. If you ever forget your password or enter it incorrectly, you have the option to reset the modem to its factory settings.

10.0.0.2 Default Login Admin Password

UsernamePasswordCommonality (%)
adminepicrouter44.4%
adminadmin33.3%
adminzoomadsl22.2%

Reset 10.0.0.2 Password

To reset your modem’s password for 10.0.0.2, follow these steps:

  1. Find a small reset button on the back or bottom of your modem. It’s usually a tiny hole.
  2. Use a small tool like a toothpick or a paperclip to press and hold the reset button for about 20 seconds.
  3. When you do this, your modem will go back to its original settings, like when you first got it.
  4. Be aware that when you reset your modem, you’ll lose your internet connection. It’s a good idea to get help from someone who knows about this if you’re not sure what to do.

How to login into 10.0 0.2 / How to use 10.0 0.2

To log in and access the 10.0.0.2 IP address, follow these steps:

  1. Open your web browser (e.g., Google Chrome, Firefox, or Safari).
  2. In the browser’s address bar, type “10.0.0.2” and press Enter.
  3. You will be directed to a login page.
  4. Enter the following default login information:
  • Username: admin
    • Password: admin
  • Click “OK” or “LOGIN.”

Once you’ve done this, you will be able to access and use the settings and features of the device associated with the correct IP address. Typically, this IP address is used to access a router or modem’s admin panel, where you can configure network settings and perform various administrative tasks.

FAQs

What is the 10.0.0.2 address?

The IP address 10.0.0.2 belongs to an address range that has been reserved for private networks. Every device that connects to your home network will get a similar address, with the last digit differing. The devices connected to your home network will then use your router and the default gateway to access the internet, and your router will handle everything to tie together your public IP address to your home network.

What are the (most common) default logins for 10.0 0.2?

The most common default login credentials for the IP address 10.0.0.2 are:

  • Username: admin
  • Password: admin

10.0 0.2 – How to Access Router IP Address?

To access the router IP address 10.0.0.2, follow these steps:

  1. Open your web browser.
  2. In the browser’s address bar, type “10.0.0.2” and press Enter.
  3. You will be directed to a login page.
  4. Enter the username and password when prompted. The most common default login information is:
  • Username: admin
    • Password: admin
  • Click “OK” or “LOGIN” to access the router settings.

The login 10.0.02 admin process allows you to access and configure your router using the IP address.